How To Fill Paintball Tank With Air Compressor

Compressed Air for Paintball Guns? Tin can I just Use My Shop Compressor?

Paintball markers run on compressed air, and I have a nice shop compressor for air tools, can I apply my store compressor?

The answer is simply no. Paintball tanks use compressed air up to 4500psi. Your boilerplate shop compressor but goes to 150psi. Yous could fill a paintball tank to 150psi and go approx. five shots maximum off that low of a pressure. Electronic paintball markers and newer mechanical markers can shoot a paintball every bit low as 105psi, so why does information technology not piece of work? Well, information technology would work to use a shop compressor to run direct to a paintball gun, but you would need to run around connected to it! This is completely un-workable.

Your paintball tank can be filled to 4500psi (Carbon Fibre tanks but) and the internal air capacity is measured in ci (cubic inches) and then the more "ci" the more than shots per fill yous will get off your air tank.

3000 psi vs. 4500 psi Air Tanks

When you are looking for a paintball air tank, you have the pick of either 3000psi or 4500psi. 4500 psi is more pressure and will give you significantly more shots from a unmarried full fill up. No professional or serious player uses 3000psi. Recall of it every bit a stepping stone to 4500psi. We volition ever recommend a 4500psi Carbon Fibre tank from Gladiatair over a 3000psi due to the following reasons.

• i.Shots per Fill up

The 4500psi tanks get significantly more shots per fill than 3000psi tanks. Based on pressure alone over 50% more than shots per make full!

• 2.Weight

45000psi tanks are lighter because they are made from aluminum and a carbon fiber wrap.

• iii.Capacity in ci

4500psi tanks are available with bigger internal capacity or volume. This ways less refilling and more shots per fill!

• iv.Ergonomics

3000psi tanks are heavy and cumbersome on your mark compared to 4500 carbon tanks.

What tank should I choose?

The 4500 Gladiatair 68ci, 77ci, and 88ci are the virtually popular options. If you are a bigger role player and want the ultimate in shots per fill up, Paintballshop.com even offers a U98 tank. The "U" stands for ultralight and they are lighter than the 3000psi tanks! The most popular size is the U77 Gladiatair!

https://paintballshop.com/gladiatair-u77-ultralight-68ci-4500psi-tank/

If you lot are on a upkeep, go for the C68 air tank. It is cheaper than the ultralights but has the same functioning in terms of shots per fill up.

A 3000psi tank is a slap-up option if your local paintball field only fills to 3000psi! Getting a 4500psi could exist considered a waste of money if you but can become 3000psi fills at your principal field.

Where can I fill my Paintball Tank!

If you lot desire to go your paintball tank filled, 95% of all paintball fields run compressed air, and getting information technology filled at one of those is the best bet. Other places to get them filled would be a scuba swoop shop, or possibly a fire brigade. The paintball field is the best option.

If you lot want to get remote and have your own air supply, the Shootair range of tanks are amazing. They are expensive, but yous get a large 4500psi carbon fibre bulk tank that is portable and good for many fills of your paintball markers air tank.

We cannot fill up your air tank before aircraft, information technology is illegal to send pressurized vessels, especially at 4500psi!

Can I fill my paintball tank from a scuba tank?

Yes you can! Nosotros sell a Scuba fill station for but 99.00 and they prune directly to a scuba tank!

Be aware that most scuba tanks are merely 3000psi and cannot fully fill a 4500psi paintball tank. Iit will however get y'all ¾ full and still piece of work, but not platonic. This is where the Shootair solution comes into play!

Regulators

Every paintball air tank needs a regulator to proceed the summit. They hold the force per unit area within the canteen and but release a prepare output pressure level that paintball guns like to run on. Effectually 750psi is normal and the paintball marker will and so have another regulator inside to step it downwards further! They also attach the tank to the mark!

Warning:

A 3000PSI air tank needs a 3000psi regulator, and a 4500psi tank needs a 4500psi regulator. DO NOT PUT A 3000psi regulator on a 4500 tank or a 4500psi regulator on a 3000psi tank. If you practise, y'all are risking astringent personal injury at your cost. The regulator has safety burst discs that rupture when a pressure is exceeded. And so, by using the wrong regulator the wrong force per unit area safety outburst disks are being used.

Factor in the cost of a regulator to your paintball marker package. We offer 3 styles of regulators

4500 Gladiatair Regulator

https://paintballshop.com/gladiatair-4500psi-warriair-regulator-high-force per unit area/

Dye DTS 4500 Regulator

https://paintballshop.com/dye-dts-regulator/

3000psi Gladiatair Regulator

https://paintballshop.com/gladiatair-3000psi-warriair-regulator-high-pressure level/

We hope this helps yous in your choice of picking an air tank and regulator!

Check out this video where we compare the various air tanks!

Adam Connolly

Paintballshop.com

Source: https://paintballshop.com/blog/can-i-fill-my-paintball-tanks-at-home-paintball-air-tank-questions-and-answers/

Share this post