How To Control Volume With Firestick Remote

RobotPoweredHome is reader-supported. When you buy through links on my web log, I may earn an chapter commission. Equally an Amazon Acquaintance, I earn from qualifying purchases.

I recently bought an Amazon Fire Stick along with a remote for my Boob tube, but unfortunately, I was unable to command its volume using the remote.

I had to switch betwixt the Fire Stick remote and my Television receiver's principal controller to change volume levels.

This whole process became cumbersome speedily, so I searched the Internet to learn how to solve this trouble.

After spending several hours researching, I solved my problem for proficient.

I accept compiled all relevant information near pairing a Fire Stick remote to a TV in this article.

To pair a Fire Stick remote to Goggle box for volume control, ensure that the remote has an enabled volume control office, then turn on the TV with the Fire Stick plugged in, and go to Settings > Equipment Control > Add together Equipment > TV > Select your TV > Restart the TV.

In improver to covering the pairing procedure of a Fire Stick remote to a TV for volume control, this article also deals with pairing a replacement or additional remote and purchasing a third-party alternative.

Pairing a Burn down Stick Remote to TV for Book Control

A Fire Stick remote can be paired to nearly smart Boob tube brands to command their performance, like ability and volume control.

However, in that location are some models which exercise non control volume. So, the first footstep for you is to cheque if your remote has the volume control office.

One time you ensure that, it is a unproblematic series of steps to pair the Fire Stick remote to your Telly:

Plug the Burn Stick into your TV and turn it on.
Open 'Settings'.
Go to 'Equipment Control' and select 'Add together Equipment'.
Click on 'TV'.
Cull your TV brand.
You will go a prompt asking yous to press the Fire Stick remote power button to plow off the Tv set.
Practice so and expect for a few seconds earlier turning the TV back on.
Select 'Yep' from the options displayed on the screen if you can restart your TV using the remote. This means your devices were successfully paired.
Next, utilise the remote to change the volume of your TV.
One time done, select 'Yep' and follow the on-screen instructions to terminate the setup procedure.

Yous may need to go through this process a few times, as the pairing tin be tricky.

Pairing the Remote During Fire Stick Setup

A Burn down Stick remote needs to exist paired before using it for the first time or after resetting information technology.

Ideally, your remote should automatically pair during the Fire Stick setup process.

Notwithstanding, if information technology fails to pair, concur the 'Home' push button on the remote until the 'Press Play to commencement' option shows up on the TV screen.

If this does non work, remove the remote'southward batteries and wait xxx-xl seconds. Insert the batteries back in and agree the 'Abode' push.

Pairing an Additional Fire Stick Remote

Y'all tin use more ane remote with your Burn down Stick simultaneously, 7 remotes to be exact.

You may desire to accept two remotes because your older remote provides y'all with some functions that the new 1 doesn't.

Follow these steps to pair an additional Fire Stick remote to your TV:

Get to the Fire Stick 'Home' screen using your current remote.
Open 'Settings'.
Select 'Controllers and Bluetooth Devices'.
Tap on 'Amazon Fire Television set Remotes'.
Click on the 'Add together a New Remote' option.
Your Fire Stick will start searching for a new remote. Agree the 'Dwelling' button on the new remote for 10-15 seconds.
In one case the remote has been plant, press the 'Select' button on the older remote to confirm the pairing of the new one.
Try to apply the new remote to check if information technology's paired properly.

Y'all can also Pair a new Burn down Stick remote without the old ane.

Purchasing a Replacement Fire Stick Remote

In case you take lost or damaged your Fire Stick remote, you can get a replacement for your device without having to purchase a new Fire Stick.

All yous need to do is to buy a remote that is compatible with your device to ensure that it works properly.

These are the Best Fire Stick replacement remotes you can buy today.

Pairing the Replacement Burn down Stick Remote

To pair a new or replacement remote to your TV, you demand to:

Unplug your Fire Stick from the power source.
Add together batteries to the new remote.
Power on your Burn down Stick after a infinitesimal.
Wait for the 'Domicile Screen' to show up.
The new remote should automatically pair to the Tv set after the reboot. To check this, try using the remote.
If it didn't, hold the 'Home' push button on your remote for fifteen to 20 seconds.
You will receive a notification that the remote has been successfully paired. In case yous don't go the notification, endeavour using the remote.

Troubleshooting a Fire Stick Remote to Control TV Volume

In instance you face problems with your Fire Stick remote for volume command, check out these mutual mistakes:

Brand sure that 'Mute' is not enabled.
Check the remote batteries.
Remove whatsoever obstacles blocking the connection between the TV and the remote.
Try pressing 'Select' and 'Play' to restart your Fire Stick streaming device to eliminate whatsoever glitches.

You could also check the equipment control settings to see if your speakers are connected:

Launch 'Settings'.
Click on 'Equipment Control'.
Select 'Manage Equipment'.
If your speakers are not showing upward, you tin can choose 'Add Equipment' from the 'Equipment Command' menu.

Alternatively, yous can try using Alexa to control your TV volume. Use the Alexa voice control by saying, 'Alexa, increase volume' and 'Alexa, subtract volume'.

Resetting your Burn Stick remote should be your last resort since it volition remove all custom settings and preferences of the Burn down Stick in addition to all downloaded content.

To reset your Fire Stick remote, you accept to:

Unplug your Burn down Stick from the Idiot box and power source.
Wait for 60 seconds.
Press and hold the 'Left + Card + Back' buttons simultaneously for 12 seconds.
Await for 5-x seconds and remove the batteries from the remote.
Plug your Burn down Stick back in and wait for a infinitesimal.
Insert the batteries in the remote.
Press the 'Home' button to cheque if Fire Stick and Tv set are synchronized.

Pairing a Third-Party Remote With Fire Stick

Many options are available in the market if yous desire to purchase a third-political party remote for your Burn down Stick.

You tin get a universal remote or a remote from another service provider, like Roku.

However, before doing so, remember that Burn down Stick uses Bluetooth to communicate with its remotes.

That means if you desire to go a tertiary-party remote, ensure it has Bluetooth and is compatible with Fire Stick.

You lot can also utilize IR (Infrared) remotes with your Fire Stick, but they may need boosted hardware, like adapters and cables.

The pairing process for third-party remotes to a Fire Stick is the same as that of Burn Stick remotes.

Here are vi best universal remotes for Amazon Burn down Stick and Fire Tv set.

Contact Customer Support

If yous face any problems while pairing a Fire Stick remote to your Idiot box or need help regarding whatever other Burn Stick result, you tin can visit Fire Idiot box support.

You tin check help guides and FAQs or contact the customer support squad to inform them about your problem and become it solved.

If you're Fire Stick won't load home pages, we accept a guide to fix that.

Final Thoughts

You can utilise Fire Stick remotes to command various functions of your Boob tube, merely not all models accept the volume control function.

This is especially truthful for old Fire Stick remotes. The new ones accept defended buttons for different controls.

A Fire Stick remote tin be paired to a Television set for volume control via 'Equipment Command' found in 'Settings'.

Yous can also use Alexa to control the volume on your Television receiver.

In addition, Burn down Stick allows yous to pair multiple remotes (up to 7) simultaneously.

Yous May Also Enjoy Reading

Volume Non Working on Fire Stick Remote: How to Fix
How to Use Fire Stick Without Remote: Complete Guide
Fire Stick Remote Doesn't Piece of work: How To Troubleshoot
How To Unpair Burn down Stick Remote In Seconds: Easy Method
Fire Stick Remote App Not Working: How to Set up in seconds

Oft Asked Questions

How do I enable book and power control using a Fire Stick remote?

You can enable volume and ability control using a Fire Stick remote by pairing information technology with your Television.

To do and so, Open up Settings > Equipment Control > Add together Equipment > Idiot box > Select your TV > Restart the TV.

How practise I program a Fire Stick remote to command surround audio?

Yous can program a Burn down Stick remote to control surround sound by opening 'Settings' and selecting 'Controller and Bluetooth Devices'.

However, it will only work if your soundbar supports Bluetooth.

Can I control my TV book with the Burn Stick remote?

Yep, you can control your TV's volume with a Burn down Stick remote. To do so, you lot need to pair the remote to your device.

Source: https://robotpoweredhome.com/pair-firestick-remote-to-tv-volume/